Back to blog

Workshop Recap: Intro to CAD in Onshape, Step by Step

Over two meetings, the mechanical workshop took new members from a blank Onshape account to their first extruded parts. Here's everything we covered.

Posted Meeting recap Build updates 3 min read

By Grizzly Tech

CAD model of a robot part on a laptop

Summary

Every part on our robot starts as a sketch in CAD. On September 8 and September 15, engineering co-leads Jason Zhu and Neil Benjamin taught the Intro to CAD workshop in D119. This post goes through the workshop slide by slide, so you can follow along even if you missed it.

What CAD is and why we use Onshape

CAD (computer-aided design) software is used to create precise 2D drawings and 3D models. It lets us design and test parts on screen before building them, which catches problems early. It's used throughout engineering and robotics for mechanisms, assemblies, prototypes, and parts ready to manufacture.

The team designs in Onshape because it runs in the browser, so it works on school computers with nothing to install, and several people can work on the same design at once.

Getting started

  1. Create an account at onshape.com.
  2. Open a new sketch.
  3. Learn the interface: the origin, the three default planes, the view cube, the sketch toolbar, the measure tool, and undo/redo.

The original meeting slides said to bring a mouse, and we still recommend one. CAD is much easier with a scroll wheel than a trackpad.

Sketching

The first sketch everyone made was a rectangle:

  1. Click Sketch, then select the Top Plane.
  2. Choose Center Point Rectangle and draw from the origin.
  3. Add dimensions with the dimension tool (shortcut: D).
  4. Click the green checkmark to finish the sketch.

Next came lines. Start a line at the origin and drag it anywhere. The number shows its length. A blue line is undefined and a black line is fully defined, which is how you know the sketch can't shift by accident. Lines snap into place when they're straight, and selecting two connected lines lets you set the angle between them.

Construction lines and mirroring

Construction lines are helper lines that guide a sketch without becoming part of the 3D shape. Press Q to toggle any line or tool into construction mode. They're best for setting up symmetry, center axes, and clean hole patterns.

Combined with the Mirror tool, construction lines let you draw half a part and reflect it across a center line. You get perfect symmetry with half the work.

Extrusions

An extrusion turns a 2D sketch into a 3D part. Leave sketch mode, select the surface to extrude, and type a depth, or drag the arrow. Remove extrudes work the other way, cutting material out of a part using a sketch. That's how holes and pockets are made.

Guided tutorial and independent practice

Both sessions ended the same way: a guided tutorial where everyone sketched a part together step by step, followed by a YouTube tutorial and an independent practice set of models to recreate. Those practice parts led straight into the assemblies unit on September 22 and, later, the drivetrain CAD project.